|
A New Look at Hard Rock Abrasivity Evaluation Using Acoustic Emission Technique (AET) |
February |
2022 |
|
Prediction of Rock Abrasivity Index (RAI) and Uniaxial Compressive Strength (UCS) of Granite Building Stones Using Nondestructive Tests |
March |
2022 |
|
Rock Type Identification Using Analysis of the Acoustic Signal Frequency Contents Propagated While Drilling Operation |
January |
2022 |
|
Using non-destructive tests for estimating uniaxial compressive strength and static Young’s modulus of carbonate rocks via some modeling techniques |
November |
2021 |
|
Predicting the Geomechanical Properties of Hard Rocks Using Analysis of the Acoustic and Vibration Signals During the Drilling Operation |
March |
2021 |
|
Experimental Study of the Effect of Cooling Lubricating Fluids on Penetration Rate in a Hard and Soft Rock Drilling Process |
November |
2021 |
|
Development of a kinetical investigation method using adsorption kinetic models for selection and optimization of flocculation process |
July |
2021 |
|
Energy consumption in open-pit mining operations relying on reduced energy consumption for haulage using in-pit crusher systems |
April |
2021 |
|
Development of a new test method for evaluating the abrasivity of granite building stones during polishing process based on weight loss of abrasive tool |
October |
2021 |
|
Study of Effect of Cooling/Lubricating Fluids, Machining Parameters, and Rock Mechanical Properties on Penetration Rate in Rock Drilling Process |
July |
2021 |
|
Wastes production in dimension stones industry: resources, factors, and solutions to reduce them |
September |
2021 |
|
Laboratory tests on the strengthening of wet-mix shotcrete lining with the use of nanomaterials |
January |
2021 |
|
The effect of geological properties of dimension stones on the prediction of Specific Energy (SE) during diamond wire cutting operations |
April |
2020 |
|
The effect of Poisson's ratio on the creation of tensile branches around dynamic faults |
February |
2020 |
|
Experimental study on the influence of the different percentage of nanoparticles on strength and freeze–thaw durability of shotcrete |
September |
2020 |
|
Investigating a comprehensive model for evaluating occupational and environmental risks of dimensional stone mining |
January |
2020 |
|
Strengthening fiber-cement composites by increasing fiber adhesion using bacterial nanocellulose |
May |
2020 |
|
Application of bacterial nanocellulose fibers as reinforcement in cement composites |
April |
2020 |
|
Applicability of the classical fracture mechanics criteria to predict the crack propagation path in rock under compression |
November |
2020 |
|
Investigating the acoustic signs of different rock types based on the values of acoustic signal RMS |
April |
2020 |
|
تقویت کامپوزیت های الیاف-سیمان به کمک افزایش چسبندگی الیاف با استفاده از نانوسلولز باکتریایی |
April |
2020 |
|
Application of bacteria for coal dust stabilization |
March |
2019 |
|
Evaluation of required thrust force based on advance rates in shielded TBMs under squeezing conditions |
October |
2019 |
|
Determining the optimum cutting direction in granite quarries through experimental studies: a case study of a granite quarry |
February |
2019 |
|
Numerical simulation of methane distribution in development zones of underground coal mines equipped with auxiliary ventilation |
July |
2019 |
|
A new quality factor for the building stone industry: a case study of stone blocks, slabs, and tiles |
February |
2019 |
|
Application of Acoustic Emission (AE) in mining and earth sciences: a review |
June |
2019 |
|
Analytical investigations of interface crack growth between two dissimilar rock layers under compression and tension |
September |
2019 |
|
Development of a match factor and comparison of its applicability with ant-colony algorithm in a heterogeneous transportation fleet in an open-pit mine |
January |
2019 |
|
Developing a novel model for predicting geomechanical features of carbonate rocks based on acoustic frequency processing during drilling |
April |
2019 |
|
Prediction of shotcrete compressive strength using Intelligent Methods; Neural Network and Support Vector Regression |
January |
2019 |
|
Investigating the Applicability of Imperialist Competitive Algorithm in the Problem of Allocating Truck to the Open Pit Mine |
March |
2019 |
|
Analytical and numerical investigations of dynamic crack propagation in brittle rocks under mixed mode loading |
October |
2019 |
|
تأثیر نوسانات فشار بر شکست هیدرولیکی در تونلهای تحتفشار با روباره کم |
July |
2018 |
|
Optimization of diamond wire cutting performance in travertine quarrying |
January |
2018 |
|
First-Order-Second-Moment Analysis of Reliability in Predicting the Rate of Penetration |
February |
2018 |
|
Frictional crack initiation and propagation in rocks under compressive loading |
October |
2018 |
|
Model tree approach for predicting uniaxial compressive strength and Young’s modulus of carbonate rocks |
February |
2018 |
|
Implementing acoustic frequency analysis for development the novel model of determining geomechanical features of igneous rocks using rotary drilling device |
June |
2018 |
|
Razvoj novoga modela za odabir rudarske metode pomoću neizrazite logike; primjer rudnika ugljena Tazareh, provincija Semnan, Iran |
January |
2018 |
|
Forecasting ground vibration due to rock blasting: a hybrid intelligent approach using support vector regression and fuzzy C-means clustering |
April |
2018 |
|
Discontinuity modelling and rock block geometry identification to optimize production in dimension stone quarries |
January |
2018 |
|
Haulage system selection for open pit mines using fuzzy MCDM and the view on energy saving |
March |
2018 |
|
The development of a novel model for mining method selection in a fuzzy environment; case study: Tazareh Coal Mine, Semnan Province, Iran |
January |
2018 |
|
Investigating an innovative model for dimensional sedimentary rocks characterization using acoustic frequencies analysis during drilling |
February |
2018 |
|
Alteration of grindability of minerals due to applying different explosives in blasting operation |
September |
2017 |
|
Environmentally sustainable mining through proper selection of explosives in blasting operation |
February |
2017 |
|
Stability assessment of hard rock pillars using two intelligent classification techniques: A comparative study |
September |
2017 |
|
تحليل قابليت اطمينان به روش ممان دوم مرتبه اول در پيش بيني نرخ نفوذ سرمته |
August |
2017 |
|
Combination of the physical and ultrasonic tests in estimating the uniaxial compressive strength and Young’s modulus of intact limestone rocks |
December |
2017 |
|
Predicting the Building Stone Cutting Rate Based on Rock Properties and Device Pullback Amperage in Quarries Using M5P Model Tree |
January |
2017 |
|
Application of carbonate precipitating bacteria for improving properties and repairing cracks of shotcrete |
September |
2017 |
|
Developing a new rock classification based on the abrasiveness, hardness, and toughness of rocks and PA for the prediction of hard dimension stone sawability in quarrying |
November |
2017 |
|
Safety survey of Iran's mines and comparison to some other countries |
January |
2017 |
|
Investigation of intact rock geomechanical parameters’ effects on commercial blocks’ productivity within stone reserves: A case history of some quarries in Isfahan, Iran |
July |
2017 |
|
Analysis of bead wear in diamond wire sawing considering the rock properties and production rate |
November |
2017 |
|
Safety survey of Iran's mines and comparison to some other countries |
January |
2017 |
|
Development of an evaluation system for blasting patterns to provide efficient production |
April |
2017 |
|
Model uncertainty of various settlement estimation methods in shallow tunnels excavation; case study: Qom subway tunnel |
October |
2017 |
|
Dual-objective Preemptive Multi-mode Resource-Constrained Project Scheduling Problem Optimization Model |
March |
2017 |
|
Flow analysis of the Rozieh water conveyance tunnel during the construction and operation phase using numerical simulation |
January |
2016 |
|
A new hybrid ANFIS–PSO model for prediction of peak particle velocity due to bench blasting |
October |
2016 |
|
An Approach to the Evaluation and Classification of Dimensional Stone Quarries with an Emphasis on Safety Parameters |
September |
2016 |
|
Assessment of backbreak due to blasting operation in open pit mines: a case study |
April |
2016 |
|
تحليل تراوش در تونل انتقال آب چشمه روزيه در مرحله ساخت و بهره برداري با بهره گيري از شبيه سازي عددي |
March |
2016 |
|
Development of a novel flyrock distance prediction model using BPNN for providing blasting operation safety |
April |
2016 |
|
بررسی عددی اثرات حفاری تونلهای شیبدار بر پایداری تونلهای اصلی آزادراه تهران شمال |
March |
2016 |
|
The Dangerous Condition of Ground during High Overburden Tunneling (A Case Study in Iran) |
February |
2016 |
|
Numerical analysis of inclined-tunneling effect on the stability of main tunnels of Tehran-Shomal (North) highway |
November |
2016 |
|
Selection of most proper blasting pattern in mines using linear assignment method: Sungun copper mine |
January |
2015 |
|
Grout penetration in fractured rock mass using a new developed explicit algorithm |
December |
2015 |
|
Blasting operation management using mathematical methods |
January |
2015 |
|
"Instrumentation locating in the western wall of Sarcheshmeh copper mine using GIS |
November |
2015 |
|
Safety Risk Assessment of Iran's underground coal mines based on preventive and preparative measures |
November |
2015 |
|
How to determine the appropriate methods to identify the geometry of in situ rock blocks in dimension stones |
November |
2015 |
|
مکان يابي محل نصب ابزار دقيق در ديواره غربي معدن مس سرچشمه با استفاده از سامانه اطلاعات جغرافيايي |
May |
2015 |
|
Developing a MatLab code for determine geometry of rock mass blocks and its applications in mining and rock mechanic engineering |
February |
2015 |
|
Optimum cutting wire assembly in dimension stone quarries |
January |
2014 |
|
بررسی تأثیر عوامل زمین شناسی و خصوصیات ژئومکانیکی توده سنگ بر انتخاب ماشین حفاری تمام مقطع در تونل انتقال آب سبزکوه |
May |
2014 |
|
3D Numerical Simulation to Consider the Effects of EPB Tunneling on the Existing Support System |
April |
2014 |
|
The influence of geological features and geomechanical properties of rock mass on TBM selection for Sabzkouh water conveyance tunnel |
January |
2014 |
|
پیش بینی میان نشست و ارزیابی تأثیر طول گام حفاری بر میزان نشست سطح زمین ناشی از تونلسازی ، مطالعه موردی : مترو قم |
Summer |
2014 |
|
Safety risk assessment of Iran’s dimension stone quarries (Exploited by diamond wire cutting method) |
March |
2014 |
|
بررسی تأثیر عوامل زمین شناسی و خصوصیات ژئو مکانیکی توده سنگ بر انتخاب ماشین حفاری تمام مقطع در تونل انتقال آب سبزکوه |
June |
2014 |
|
Development of 2D computer program to determine geometry of rock mass blocks |
March |
2014 |
|
A novel investigation in blasting operation management using decision making methods |
December |
2014 |
|
تعمیم تئوری تعادل حدی برای شکست ترکیبی (واژگونی – قاشقی) |
April |
2014 |
|
GEOLOGICAL HAZARDS IN DEEP TUNNELING (A CASE STUDY: BEHESHTABAD WATER CONVEYANCE TUNNEL) |
January |
2014 |
|
The effect of fracture patterns on penetration rate of TBM in fractured rock mass using probabilistic numerical approach |
December |
2014 |
|
Considering Creep Parameters of Rock Mass to Evaluate the Necessity Thrust for Excavation in Squeezing Ground |
January |
2014 |
|
Developing a mathematical assessment model for blasting patterns management: Sungun copper mine |
November |
2014 |
|
Effect of physical and chemical properties of travertine deposits on mining factors in Targh quarries, |
January |
2013 |
|
انتخاب معیاری بهینه برای تخمین مقاومت برشی سطوح زبر درزه در سنگ سخت آندزیت |
July |
2013 |
|
Suggestion of the optimized criterion for estimation of shear strength of rock joint in andesite rock |
January |
2013 |
|
Selecting the most suitable blasting pattern using AHP-TOPSIS method: Sungun copper mine |
November |
2013 |
|
Numerical modeling of the effect of geometrical parameters of fractures on penetration rate of TBMin fractured rock mass |
June |
2013 |
|
THE EFFECT OF OPERATIONAL PARAMETERS ON PENETRATION RATE OF A TBM USING ARTIFICIAL NEURAL NETWORKS-A CASE STUDY: ZAGROS TUNNEL |
January |
2013 |
|
ارائه مدلی برای انتخاب روش استخراج آنومالی شماره سه گل گهر با استفاده از روش های تصمیم گیری چند معیاره |
May |
2013 |
|
Geological hazards during excavation of underground spaces (The case study: Golab tunnel), |
January |
2013 |
|
تحلیل عددی تأثیر مشخصات هندسی شکستگیهای توده سنگ بر نرخ نفوذ دستگاه TBM |
May |
2013 |
|
بررسی تأثیر مشخصات فیزیکی و شیمیایی نهشته های تراورتن بر پارامترهای استخراج در معادن طرق |
August |
2012 |
|
The Effect of Operational Parameters on Penetration Rate of a TBM Using Artificial Neural Networks-A case study: Zagros Tunnel. |
September |
2012 |
|
بررسی تأثیر پارامترهای اجرایی ماشین TBM بر نرخ نفوذ آن با استفاده از روش شبکه عصبی مصنوعی – مطالعه موردی تونل بلند زاگرس |
August |
2012 |
|
طراحی نگهداری اولیه تونل انتقال آب گلاب با تأکید بر خطرات زمین شناسی |
March |
2012 |
|
Materials Handling in World Wide Surface Mines |
March |
2007 |
